D-Link DES-3828 - xStack Switch - Stackable User Manual - Tftp Services
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
52
Global Settings
The following parameters may be viewed and modified:
Parameter Description
State
Enable or disable MAC notification globally on the Switch
Interval (sec)
The time in seconds between notifications.
History size
The maximum number of entries listed in the history log used for notification. Up to
500 entries can be specified.
Port Settings
To change MAC notification settings for a port or group of ports on the Switch, configure the
following parameters.
Parameter Description
From…To
Select a port or group of ports to enable for MAC notification using the pull-
down menus.
State
Enable MAC Notification for the ports selected using the pull-down menu.
Click Apply to implement changes made.
TFTP Services
Trivial File Transfer Protocol (TFTP) services allow the Switch's firmware to be upgraded by
transferring a new firmware file from a TFTP server to the Switch. A configuration file can also be
loaded into the Switch from a TFTP server. Switch settings can be saved to the TFTP server, and a
history log can be uploaded from the Switch to the TFTP server. The TFTP server must be on the
same IP subnet as the Switch.The TFTP server must be running TFTP server software to perform the
file transfer. TFTP server software is a part of many network management software packages – such
as NetSight, or can be obtained as a separate program. To update the Switch's firmware or
configuration file, open the TFTP Services hyperlink, located in the Administration folder.
.
Figure 6- 17. Download/Update Firmware and configuration files from a TFTP Server window
The following parameters can be configured:
Parameter Description