Garmin Cessna Caravan G1000 Pilot's Manual - page 31
190-00387-02 Rev. A
Garmin G1000 PFD Pilot’s Guide for Cessna Nav III
3-29
SUPPLEMENTAL FLIGHT DATA
To change the zoom range:
1. Turn the
joystick
clockwise to increase or
counterclockwise to decrease the range. Zoom
ranges from 500 feet to 2,000 nautical miles.
To change the declutter level:
1. Press the
INSET
softkey. Press the
DCLTR
soft-
key to remove background map details until
the desired amount of detail is depicted. The
declutter level appears above the softkey (i.e.,
DCLTR-1). Refer to the Multi Function Display
Pilot’s Guide for more details.
To enable/disable traffic data:
1. Press the
INSET
softkey. Press the
TRAFFIC
soft-
key to display Traffic Information Service (TIS)
or Traffic Advisory System (TAS) traffic. Traffic
symbology appears next to the aircraft icon
and in the bottom right corner of the map.
2. Press the
TRAFFIC
softkey again to remove data
from the map.
NOTE:
TIS displays traffic within seven nautical
miles from 3,000 ft below to 3,500 ft above the
requesting aircraft, and includes location, direc-
tion, altitude, and climb/descent information.
NOTE:
If a second TA appears or if the TAs dis-
played decrease and then increase, a new audio
is heard and an alert is displayed.
NOTE:
Refer to the Appendix for more details
about Traffic Information Service (TIS).
NOTE:
Refer to the Multi Function Display
Optional Interface Addendum for more details
about Traffic Advisory System (TAS).
To enable/disable topo data:
1. Press the
INSET
softkey. Press the
TOPO
soft-
key to display topographic land colors, which
represent land elevation.
2. Press the
TOPO
softkey again to remove topo
data from the map.
NOTE:
When topo data is removed from the
display, all cartographic data is automatically
removed and the Jeppesen Nav Data is presented
on a black background.
To enable/disable terrain data:
1. Press the
INSET
softkey. Press the
TERRAIN
softkey to display color-coded terrain tiles, which
are based upon the aircraft current altitude. A
mountain icon appears above the zoom range
in the lower right corner of the map, showing
that terrain is selected.
•
Red
(warning) – Land elevation is within 100
ft or above the aircraft current altitude.
•
Yellow
(caution) – Land elevation is greater
than 100 ft to 1,000 ft below aircraft altitude.
•
Black
– Land elevation greater than 1,000 ft
below aircraft altitude.
2. Press the
TERRAIN
softkey again to remove the
terrain data from the map.
NOTE:
Terrain data is not displayed when the aircraft
latitude is greater than 75˚ North or 60˚ South.
NOTE:
Refer to the Appendix for more details
about terrain.