KEB COMBIVERT F6 Instructions For Use Manual - page 17
2.2.1 Temperature monitoring and brake control (X1C)
The terminal block X1C provides an output for the control of a 24V motor brake and
an input for temperature monitoring. It is designed as 6 pole plug-in terminal block with
spring cage connection.
2.2.2 Control terminal block (X2A)
The control terminal block X2A is a 28 pole two-storey, plug-in terminal block with spring
cage connection. It contains:
8 digital inputs
2 digital outputs
1 relay output
2 analog inputs (plus 1 switchable analog input)
1 analog output
CAN bus interface
24V and 0V outputs
2.2.3 Safety terminal block (X2b)
The terminal block X2B based on the installed safety module.
The description is given in the manual of the safety module.
2.2.4 encoder interfaces (X3A, X3b)
Der COMBIVERT contains two universal encoder interfaces. The interfaces can be
adapted independently to different encoders.
2.2.5 Diagnostic interface (X4A)
The integrated RS232/485 interface serves for the connection of service tools (e.g.
COMBIVIS) displays or the F6 operator. Telegram DIN 66019II is used as communica-
tion protocol.
2.2.6 Real-time ethernet module (RTe)
TheReal-timeEthernetmodulecontainsmorerealtimefieldbusinterfaces.Theassign-
mentofthefieldbusinterfaces,theprotocolaswellasthefunctionofthe"NETST"LED
isdependingontheinstalledfieldbusmodule.Thedescriptionisgiveninthemanualof
thefieldbusmodule.
17
OVeRVIeW OF The CONNeCTION AND CONTROL eLeMeNTS