KEB COMBIVERT F6 Instructions For Use Manual - page 18
2.2.7 Status LeDs
2.2.7.1 Boot display
Before the LEDs start their normal function, they signal the boot procedure after switch-
ing on:
LEDs
Status
Note
VCC
NET
DEV
OPT
ST
ST
off
Device off
VCC
NET
DEV
OPT
ST
ST
booting
control is supplied by 24 V.
VCC
NET
DEV
OPT
ST
ST
FPGA booted
FPGA has been booted error-free (approx. 6 s).
VCC
NET
DEV
OPT
ST
ST
ready for oper-
ation
Device is ready for operation and the LEDs start
with their normal function (approx. 3 s).
Table 1:
LEDs at power on
2.2.7.2 VCC - LED
VCC
LED colour Description
off
-
Voltage supply of the control is switched off.
on
green
control is supplied by 24 V.
Table 2:
LED function VCC
2.2.7.3 NET ST - LED
NET ST
LED colour Description
off
-
Device off or booting
on
yellow
during switching on, if FPGA is booted
Blink
code
-
dependentonthefieldbus=>fieldbusinterfaces
Table 3:
LED function FB-ST
18
OVeRVIeW OF The CONNeCTION AND CONTROL eLeMeNTS