KEB COMBIVERT F6 Instructions For Use Manual - List of Figures
7
LIST OF FIGUReS
List of Figures
Figure 1:
Overview control board ....................................................................................................16
Figure 2:
Assembly of the control cable ..........................................................................................20
Figure 3:
Assignment of the terminal strip X2A ...............................................................................21
Figure 4:
Connection of the digital inputs at X2A ............................................................................22
Figure 5:
Examples for the connection of the digital outputs at X2A ...............................................23
Figure 6:
Example for the connection of the relay output to X2A ....................................................24
Figure 7:
Examples for the connection of the digital outputs at X2A ...............................................24
Figure 8:
Example for the connection of the analog output to X2A .................................................25
Figure 9:
Voltage input of the control ..............................................................................................25
Figure 10:
PIN assignment of the serial interface X4A......................................................................27
Figure 11:
Serial cable for the connection to a PC............................................................................28
Figure 12:
Connection CAN bus to terminal block X2A.....................................................................29
Figure 13:
Blink code „NET ST“ - LED in mode CAN ........................................................................30
Figure 14:
Assignment of the input signals (as difference signals) ...................................................32
Figure 15:
Assignment of the terminal block X1C .............................................................................36
Figure 16:
Example for the connection of the brake output at X1C ..................................................36
Figure 17:
Connection of a KTY sensor ............................................................................................38
Figure 18:
Connection examples of different temperature sensors ..................................................39