Lancia Lybra Owner's Handbook Manual - 182
182
IMPORTANT Use the hexagonal re-
cess on the upper part of the screw-
driver grip (provided) to facilitate this
operation. Insert the screwdriver bla-
de in the hole in the grip to handle
(fig. 11).
15) Make sure the surfaces of the
spare wheel that come into contact
with the hub are clean and free from
any impurities which could result in
the wheel bolts working loose.
16) Put the spare wheel on, making
sure that centring pins M (fig. 12) on
the hub coincide with the holes on the
wheel.
17) Tighten the four fastening bolts.
IMPORTANT Use the hexagonal re-
cess on the upper part of the screw-
driver grip (provided) to facilitate this
operation. Insert the screwdriver
blade in the hole in the grip to handle
(fig. 11).
18) Turn the handle to lower the car
and remove the jack (fig. 13).
19) Tighten up the wheel bolts in a
criss-cross fashion following the order
shown (fig. 14).
fig. 11
P4T0119
fig. 13
P4T0118
fig. 12
P4T0648
fig. 14
P4T0649