Lancia Lybra Owner's Handbook Manual - 235
235
OPERATION (fig. 1)
This device only works with the ig-
nition key at MAR:
To operate the rear window wiper,
turn the ring A to
'. The rear win-
dow wiper will flick.
Push stalk B forward to operate the
rear window washer. It will be switched
off when the stalk is released.
The wiper will be operated auto-
matically for a few flicks when the
rear window washer is operated.
The rear window wiper will be au-
tomatically operated for some seconds
when the windscreen wiper is work-
ing and reverse gear is engaged.
REPLACING THE BLADES
(fig. 2)
Replace the entire rear window wi-
per blade and arm assembly.
1) Lift the cover A and remove the
arm by loosening the nut B fastening
it to the pin.
2) Position the new arm correctly
and fasten the nut.
3) Lower the cover.
SPRAY NOZZLES (fig. 3)
If there is no jet of liquid, first make
sure that there is liquid in the reser-
voir (see “Car maintenance”).
The rear window washer jets can be
directed by adjusting the inclination
of the nozzles A.
fig. 1
P4T0177
fig. 2
P4T0178
fig. 3
P4T0179
REAR WINDOW WASHER/WIPER