Lancia Lybra Owner's Handbook Manual - page 83
82
– FM1
– FM2
– FM3
– LW
– MW.
See “Audio settings” for details on
how to adjust the VOLUME, BASS,
TREBLE, BALANCE and FADER
functions.
The names or the frequencies of the
six pre-set stations refer to the se-
lected waveband (FM1 - FM2 - FM3
- LW - MW).
Select RETURN (
) and confirm
to return to the main menu.
The (
) symbol will turn white
when it is selected.
AUDIO SETTINGS (8)
Press the AUDIO
z 8 button (fig. 76)
with the key at MAR. A screen (fig. 78)
showing the settings will appear after
the LANCIA trademark screen. The set-
tings are:
– BASS
– TREBLE
– BALANCE
– FADER
– VOLUME.
Repeatedly press the AUDIO
z 8
button to cyclically switch from one
function to the other.
The active function is shown in the
right-hand part of the display while
the settings are shown by a bar sym-
bol in the left-hand part of the dis-
play. Turn knob 9 (fig. 76) to adjust
the settings:
– BASS: to adjust the bass tones
(from -6 to +6)
– TREBLE: to adjust the treble
tones (from -6 to +6)
– BALANCE: to balance the sound
between the speakers on the right-
hand side and the left-hand side of
the passenger compartment (from 15
L = left to 15 R = right)
– FADER: to balance the sound be-
tween the front and rear speakers
(from 15 R = rear to 15 F = front)
– VOLUME: to adjust the volume
(from 0 to 16).
The system will automatically quit
the AUDIO settings screen five sec-
onds after the last adjustment.
fig. 78
P4T0629