Lancia Lybra Owner's Handbook Manual - 193
193
FRONT CEILING LIGHT
To replace a bulb:
1) Remove the ceiling light using a
screwdriver as a lever in point A (fig.
40) and remove cover B.
2) Loosen the screws C (fig. 41).
3) Remove the ceiling light by push-
ing it forwards and releasing it from
clip D (fig. 42).
4) Lift cover E (clipped on).
5) Release the bulbs F (fig. 43) from
the contact and replace.
6) Close the cover E by fastening it
in the recess.
7) Refit the ceiling light by fastening
clip D first and then press on the front
part to engage the tabs G (fig. 42).
IMPORTANT When refitting the
ceiling light check that the electrical
wires are positioned correctly.
8) Fasten screws C.
9) Refit cover B by fitting the front
part first and then press on the back
until it clips back.
fig. 40
P4T0144
fig. 41
P4T0145
fig. 43
P4T0147
fig. 42
P4T0146
IF AN INTERIOR BULB BURNS OUT