Lancia Lybra Owner's Handbook Manual - 192
192
NUMBER PLATE LIGHTS
(fig. 36)
To replace the bulb:
1) Loosen the screws A and remove
the lens B.
2) Remove the bulb C by releasing
the side contacts and replace it.
3) Refit the lens B and fasten with
screws A.
ADDITIONAL BRAKE LIGHT
(THIRD BRAKE LIGHT)
(fig. 37-38-39)
To replace a bulb:
1) Grasp the light cluster A by the
side recesses B and remove it by
pulling it forwards.
2) Remove the connector C from the
housing on the rear window shelf.
3) Disconnect the connector by
holding the retainer pressed.
4) Remove the additional brake light
cluster D from cover E by releasing
the side retainers F.
5) Insert a new additional brake
light cluster in cover E so that it clips
in the side retainers F.
6) Connect the electrical connector
C and insert it in its housing on the
rear window shelf.
7) Reposition the light cluster by in-
serting tabs G in the housings H on
the rear window shelf. Push it back-
wards to fit it back in place.
fig. 36
P4T0141
fig. 37
P4T0276
fig. 38
P4T0277
fig. 39
P4T0278