Lancia Lybra Owner's Handbook Manual - 189
189
Main beam headlight (fig. 26)
To replace the bulb:
1) Remove the connector from the
bulb.
2) Release the fastening clip A and
remove the bulb.
3) Insert the new bulb. Make the tab
B on the metal part of the bulb coin-
cide with the specific groove on the
headlight dish.
4) Refit the fastening clip and refit
the connector.
Front side light (fig. 27)
To replace the bulb:
1) Remove the bulb holder A by
holding the tab and turning it slightly.
2) Remove the bulb B by pressing it
slightly and turning it anticlockwise.
3) Replace the bulb and refit the
clipped in bulb holder.
FRONT DIRECTION
INDICATORS
To replace the bulb:
1) Turn the bulb holder A (fig. 28)
anticlockwise and remove it.
2) Remove the bulb B by pressing
it lightly and turning it anticlockwise.
3) After replacing the bulb, refit the
bulb holder on the lens.
fig. 27
P4T0131
fig. 28
P4T0650
fig. 26
P4T0719