Lancia THESIS CONNECT Owner's Manual - 102

102

– Multifunction key 5 = to move sec-

tion “5” to the centre of the display

– Multifunction key 6 = to move sec-

tion “6” to the centre of the display

– Multifunction key 7 = to move sec-

tion “7” to the centre of the display

– Multifunction key 8 = to move sec-

tion “8” to the centre of the display.

The multifunction keys “Grid off”

and “Grid” make it possible to display

the map at full screen or with sec-

tions.

Press “Go back” to return to the

previous screen.

“OPTIONS” FUNCTION

The “Options” function (

fig. 88

)

displays the menu with map settings;

the options available are the follow-

ing:

– Curr. position

– Destination

– North up

– Heading up

– Pictogram.

“Curr. position” displays the map

section according to the current posi-

tion of the car. “Destination” displays

the section with the destination (des-

tination is shown by a red cross). 

Selecting “North up” the visible area

of the map is shown with the upper

edge of the monitor indicating north.

Selecting “Heading up” the visible

area of the map is shown with the up-

per edge of the monitor indicating the

direction of travel.

Activating the “Pictogram” option

will display the next manoeuvre to

perform by a white arrow at the top

of the display on the left-hand side.

fig. 88

L0A5142g

087-102 connect thesis GB  22-10-2007  10:43  Pagina 102