Lancia THESIS CONNECT Owner's Manual - page 42
41
Listening to stored stations
Proceed as follows:
– select the required frequency band
(FM1, FM2, FM3-AS, MW or LW)
with the SRC key
12
(
fig. 1
) or the
multifunction keys;
– briefly press one of the station
storage keys (1), (2), (3), (4), (5) or
(6).
In the FM1, FM2 and FM3-AS
bands, if reception is poor and the
“RDS-AF” alternative frequency seek
function is on, a station with the
strongest signal that is broadcasting
the same programme is automatically
sought.
Automatic tuning
This function automatically seeks
stations in the chosen band.
Proceed as follows:
– select the frequency band (FM1,
FM2, FM3-AS, MW or LW) with the
SRC key
12
(
fig. 1
) or the multifunc-
tion keys;
– press key
6
or
7
(
fig. 1
) to start the
automatic search for tuning the next
station that can be received in the di-
rection chosen, respectively lowering
or highering the frequency.
If the “TP” function (traffic infor-
mation) is on, the tuner only seeks
stations that broadcast traffic bul-
letins.
If the “PTY” function is on, the
tuner only seeks PTY stations.
Manual station storage
The station being listened to can be
stored in the range chosen with the
multifunction keys (1), (2), (3), (4),
(5) and (6).
Keep one of these keys pressed until
the display shows the number of the
key with which the station has been
stored.
Automatic station storage
The CONNECT tuner is provided
with the “Autostore” function. When
this function is on the radio automat-
ically stores, in the FM3-AS band, the
6 stations with the strongest signal.
To turn this function on, see previous
paragraph “Autostore function”.
028-061 connect thesis GB 22-10-2007 10:41 Pagina 41