Lancia THESIS CONNECT Owner's Manual - 137

137

“DATA TO DESTINATION”

FUNCTION

This function shows on the left-hand

side of the display the distance to des-

tination, the estimated time of arrival

and the time elapsed from the start of

the journey. Distance is expressed in

km; when the destination is near the

value is expressed in metres (m).

If the navigation system is not in-

stalled or if off, when selecting this

function the relevant warning mes-

sage will be displayed.

DATA RESET

To reset the on-board computer

data, press the “Reset” multifunction

key on the main TRIP screen. After

pressing the key a new screen with the

following options (

fig. 93

) will be dis-

played:

– Reset since hh:mm

– Reset all data.

Press “Go back” to return to the

main on-board computer screen.

The left-hand side of the display

shows the data that can be reset:

– Travel time

– Distance covered

– Average consumption (Avg. cons.)

– Average speed.

Select and confirm “Reset since

hh:mm” to reset partial data. Select

and confirm “Reset all data” to clear

all the on-board computer data. Be-

fore resetting the system will ask for

confirmation: press “Yes” to reset oth-

erwise press “No”.

fig. 93

L0A5147g

132-151 connect thesis GB  22-10-2007  10:45  Pagina 137