Lancia THESIS CONNECT Owner's Manual - 134

134

“CONSUMPTION & RANGE”

FUNCTION

This function shows on the left-hand

side of the display (

fig. 90

) the aver-

age consumption, the current con-

sumption and the range for km 

K

.

The average consumption values are

calculated from the last manual (since

“hh:mm”) and automatic (“contin-

ued”) reset of the on-board computer. 

The average consumption indicates

the average consumption values cal-

culated from the last reset. The aver-

age consumption value is obtained by

dividing the distance covered by the

fuel. At starting the on-board com-

puter shows the last value measured

before turning off.

The value is expressed in “km/l”

(km covered with 1 litre fuel) or in

“l/100km ” (fuel litres per 100 km),

with an accuracy of 0.1 km/l. The

value is updated every 10 seconds or

every 0.1 km, depending on the first

value reached.

The current consumption value in-

dicates the fuel consumption of the

car when travelling and it is therefore

helpful to learn the fuel consumption

in relation to the driving style

adopted. This value is the same with

both on-board computer functions

(manual or automatic reset) and is

displayed 10 seconds after the engine

is started or the on-board computer is

reset.

The value is expressed in “km/l”

(km covered with 1 litre fuel) or in

“l/100km” (fuel litres per 100 km),

with an accuracy of 0.1 km/l. 

Range shows the distance in km that

the car can still cover before needing

fuel, assuming that driving style is un-

varied. The travel distance to empty

calculated depends on the amount of

fuel still in the tank and on the aver-

age consumption rate. At starting the

on-board computer shows the last

value measured before turning off.

The updated value will be displayed

30 seconds after the engine is started

or the on-board computer is reset.

fig. 90

L0A5144g

132-151 connect thesis GB  22-10-2007  10:45  Pagina 134