Lancia THESIS CONNECT Owner's Manual - page 40
39
To change the type of PTY pro-
gramme, press the keys
6
or
7
(
fig. 1
)
or one of the 6 preset keys. If the dis-
play shows the frequency or station
name, pressing the keys
6
or
7
(
fig. 1
)
the type of current programme will be
shown.
To store the current programme
type on one of the 6 preset keys, press
the preset key at length (over 2 sec-
onds).
To seek a station with PTY pro-
gramme proceed as follows:
– select an FM band with the SRC
key
12
(
fig. 1
);
– set the PTY programme type;
– press key
6
or
7
(
fig. 1
) to start the
automatic search for tuning the next
station that can be received in the di-
rection chosen, respectively lowering
or highering the frequency. The tuner
will only seek PTY stations.
If no station is available with this
type of programme, the station se-
lected previously is returned and for
about 2 seconds the display will show
“NO-PTY”.
To exit the screen with the list of
PTY programmes, choose a type of
programme, or “None” if you do not
wish to set a programme type.
“AUTOSTORE” FUNCTION
(automatic station storage)
To turn on the “Autostore” function
(automatic station storage), select and
confirm it with the right knob
21
(
fig. 1
).
When this function is on, the radio
automatically stores the 6 stations with
the strongest signal, in decreasing or-
der of intensity of the signal in the
FM3-AS frequency band.
If the “TP” function (traffic informa-
tion) is on, only stations that broadcast
traffic information will be stored. This
function can be turned on also when
playing a cassette or a CD.
During automatic storage the dis-
play shows the wording “Search in
Progress”. To interrupt the automatic
storage process, turn off the “Auto-
store” function pressing the ESC key
23
(
fig. 1
); the radio will tune to the
station heard previously before the
function was activated.
028-061 connect thesis GB 22-10-2007 10:41 Pagina 39