Lancia THESIS CONNECT Owner's Manual - page 34

33

“SDV” FUNCTION 

(volume changing with speed)

(fig. 18)

The “SDV” function makes it possi-

ble to automatically adjust the radio

volume level to the speed of the car,

increasing it as the speed increases to

maintain the correct ratio with the

noise level in the passenger compart-

ment.

The adjustment levels available are:

– OFF (function off)

– 1 (very weak)

– 2 (weak)

– 3 (medium)

– 4 (strong)

– 5 (very strong).

To turn the function on/off or enter

the setting, proceed as follows:

– select and confirm the “SDV”

function turning and pressing the

right knob 

21

(

fig. 1

);

– turn the knob right or left to select

a setting or turn the function off, then

press the knob to confirm.

Pressing “Cancel” resumes the set-

tings stored previously.

“START VOL.” FUNCTION

(volume level at power on) 

(fig. 19)

The “Start vol.” function shall be

used to set the max. volume level at

CONNECT power on.

If when switching the system off, the

volume is higher that the set one, the

system will restore automatically the

set volume level. 

Proceed as follows: select and con-

firm the “Start vol.” function with the

right knob 

21

(

fig. 1

); turn the knob

right to increase the max. power on

volume or left to reduce it.

fig. 18

L0A5090g

fig. 19

L0A5091g

028-061 connect thesis GB  22-10-2007  10:41  Pagina 33