Lancia THESIS CONNECT Owner's Manual - 139

139

“LOG” FUNCTION

This function, that is turned on by

pressing the “LOG” multifunction key

on the main on-board computer

screen (TRIP) (

fig. 89

), makes it pos-

sible to store the most significant trip

data (e.g. kind and purpose of the

trip, visitor, name of the driver, dis-

tance covered, etc.).

The “LOG” function memory is pro-

vided with three different lists, each

one can store 13 trips that can be ac-

cessed by selecting the user’s name. 

The system identifies the users by

“User 1”, “User 2” and “User 3” but

each user can customize his/her

name.

To customize the name, press

“Name”, then select and confirm the

required name with the right knob 

21

(

fig. 1

).

Enter the user’s name on the new

screen displayed selecting and con-

firming the characters with the right

knob. To speed up character entry,

the system automatically moves to the

beginning or the end of the list by

pressing keys “

¯ ˙

”.

To enter a blank space use “_”. 

The multifunction keys “ABC abc”

allow you to pass from CAPITAL to

small letters and vice versa. 

To confirm the name press “OK”,

and to correct it press “Correct”.

Press “Cancel” to quit without stor-

ing the name.

To access the main “LOG” screen

(

fig. 95

) after pressing the relevant

multifunction key, select and confirm

the user’s name with the right knob.

The options available are the fol-

lowing:

– Read

– Edit

– Create

– Delete

– Select.

To select a stored item, select and

confirm the “Select” option with the

right knob, then turn the knob to

move the cursor to the required item

and confirm it by pressing the knob.

Press “Go back” to return to the

previous screen. 

fig. 95

L0A5149g

132-151 connect thesis GB  22-10-2007  10:45  Pagina 139