Lancia THESIS CONNECT Owner's Manual - 118

118

RADIO

To control the radio functions

through voice commands, say “Ra-

dio” after pressing the VOICE button

A

(

fig. 2

).

The radio functions that will be con-

trolled are the following:

– band selection (AM-FM)

– “Autostore” function (see next

paragraph)

– tuning to the first station with

higher or lower frequency

– direct frequency selection

– stored station selection

– storing radio stations.

The voice prompts used by the sys-

tem during radio function activation

are the following:

Used voice prompts

I did not understand you. Please say a 

command or say “Help”

To operate the radio, you can select from the 

following commands: “Next channel”, 

“Previous channel”, “Autostore”,

“AM”, “FM”. Commands such as:  

“Frequency ninety-nine point five”, 

“Channel number three”, “Store at number 

three” are also possible.

To get more help, please say “Help general”.

The following commands are available: 

“Main page”, “Dark mode”, “Show arrows”, 

“Zoom in”, “Zoom out”, “Repeat message”. 

You can always activate a device with 

the following commands: “Radio”, “CD player”,

“CD changer”, “Tape”, “TV”, “Telephone”. 

You can always exit the dialog with 

“Cancel”. Please say a command after the beep

Sorry I did not understand you. 

If you would like to say a new command, 

please press the “Voice” button first

Action to take

Say a command or say “Help”

Say one of the commands 

suggested by the system

Say one of the commands suggested

by the system or exit the dialog

Error, procedure aborted. 

To start a new procedure press the

VOICE button and then say the 

required command after the beep

103-131 connect thesis GB  22-10-2007  10:43  Pagina 118