Lancia THESIS CONNECT Owner's Manual - page 9

8

MULTIFUNCTION

INFORMATION DISPLAY

The system uses a graphic 7“, 16:9

LCD 256-colour TFT display with a

resolution of 480 

x

234 pixels

(153.4

x

86.4 mm active matrix).

The display brightness can be

changed depending on the environ-

ment conditions and the driver’s

requirements, storing two settings,

day and night, which are can be set

manually by the user or automatical-

ly when turning on/off of the car

external lights.

GENERAL INFORMATION 

The CONNECT system controls

and provides information for the fol-

lowing systems and functions:

– Sound system with radio, cassette

player, CD-ROM/Audio CD player,

CD-changer and voice commands

– colour TV set with voice com-

mands

– GSM cell phone with voice com-

mands

– Navigation system with voice

commands

– On-board computer

– Targasys assistance services and

functions.

The interface is the multifunction

information display for all the inte-

grated components.

TURNING THE SYSTEM ON/OFF

AND STAND-BY FEATURE 

The system may be in one of the

following conditions:

– off, all functions disabled

– normal status, all functions are

active or can be enabled

– stand-by, functions partially

active and screen darkened. 

Turning the system on

The system is turned on automati-

cally turning the ignition key or the

ignition switch knob to 

MAR

. When

it is turned on the system is in the

condition that was active before the

last time it was turned off (excluding

the stand-by status that is not

restored).

When the ignition key is at 

STOP

or removed or the ignition switch

knob is at 

STOP

, the system is

turned on pressing the left knob or

the SOS key for the call for assis-

tance (to use the phone it is neces-

sary to enter the SIM card and the

PIN code, exception made for the

“emergency 112” call).

001-012 connect thesis GB  22-10-2007  10:38  Pagina 8