Lancia THESIS CONNECT Owner's Manual - 146
146
“Screen”
This function makes it possible to
change the screen colours to match
the driver needs.
Setting “Automatic” the display
colours adapt automatically to night
conditions when turning the external
lights on. When turning the lights off,
the display colours return automati-
cally to day design.
Set “Day design” or “Night design”
to set the display respectively in day
or night design.
To activate the required option, se-
lect and confirm it with the right knob
21
(
fig. 1
).
Press “Go back” to return to the
previous screen.
“Voice commands volume”
This function makes it possible to
adjust the volume of the voice com-
mands. To adjust the volume, select
and confirm the “Voice com. vol.”
function with the right knob
21
(
fig.
1
). Turn the knob right to higher the
volume or left to lower it; then press
the knob to confirm the required set-
ting.
Press “Cancel” to quit without stor-
ing the new volume setting.
“DOORS AND INTERIOR”
SETTINGS
Select and confirm this function on the
main SETUP screen (
fig. 98
), to display
the screen relevant to door, trunk and
glove box settings (
fig. 102
).
The options available are the fol-
lowing:
– Autoclose
– Doors lock if speed exceeds 20
km/h
– Lock/unlock trunk with doors syn-
chronous
– Opening driver door only
– Lock glove box.
fig. 102
L0A5156g
132-151 connect thesis GB 22-10-2007 10:45 Pagina 146