Lancia THESIS CONNECT Owner's Manual - page 51
50
“REPEAT TRACK” FUNCTION
With this function it is possible to
turn on/off the continuous repetition
of the current track.
To turn this function on/off, select
and confirm it with the right knob
21
(
fig. 1
). When the function is on,
symbol “
3
” appears in the small
square near the wording.
“REPEAT CD” FUNCTION
With this function it is possible to
turn on/off the continuous playing of
the current CD.
To turn this function on/off, select
and confirm it with the right knob
21
(
fig. 1
). When the function is on,
symbol “
3
” appears in the small
square near the wording.
“BREAK FOR TA” FUNCTION (to
receive traffic information)
If you wish to receive traffic infor-
mation while listening to CD, before
selecting the CD-changer mode, tune
to a station enabled to broadcast traf-
fic information (TP) and turn the
“TP” function on. If while playing the
CD, this station broadcasts traffic in-
formation, CD playing will be tem-
porarily stopped and resumed auto-
matically at the end of the message.
To turn this function on/off, select
the “Break for TA” function with the
right knob
21
(
fig. 1
), then press the
knob to confirm. When the function
is on, symbol “
3
” appears in the small
square near the wording.
028-061 connect thesis GB 22-10-2007 10:41 Pagina 50