Lancia THESIS CONNECT Owner's Manual - page 52
51
“SETTINGS” FUNCTION
(audio parameters setting)
(fig. 29)
To set audio parameters, select and
confirm the “Settings” function with
the right knob
21
(
fig. 1
) to display
the relevant menu, then follow the in-
structions given in paragraph “Audio
settings”.
“RANDOM CD” FUNCTION
With the “Random CD” function on,
all the CDs in the CD-changer are
played in random sequence. When all
tracks are played random playing
restarts.
To turn this function on, select and
confirm “Random CD” with the right
knob
21
(
fig. 1
). When the function
is on, symbol “
3
” appears in the small
square near the wording.
To turn this function off, select it
again and then press the right knob
21
(
fig. 1
). The function is tuned off
automatically when turning on
“Scan”, “Repeat track” or “Repeat
CD” function, or when pressing one
of the search forward/backward keys
or one of the CD selection multifunc-
tion key.
“SCAN” FUNCTION
The “Scan” function makes it possi-
ble to listen to all the CD tracks for
about 12 seconds.
To turn this function on, select and
confirm “Scan” with the right knob
21
(
fig. 1
). When the function is on,
symbol “
3
” appears in the small
square near the wording.
To turn this function off, select it
again and then press the right knob
21
(
fig. 1
). The function is tuned off
automatically when turning on “Ran-
dom CD”, “Repeat track” or “Repeat
CD” function, or when pressing one
of the search forward/backward keys
or one of the CD selection multifunc-
tion key.
fig. 29
L0A5099g
028-061 connect thesis GB 22-10-2007 10:41 Pagina 51