Lancia THESIS CONNECT Owner's Manual - 149
149
The options available with the mul-
tifunction keys are:
– Driver
– Passenger
– Store
– OK
– Cancel.
To select the seat press “Driver” or
“Passenger”. To activate or deactivate
the different settings, select and con-
firm them with the right knob
21
(
fig.
1
). To store new settings press “OK”.
Press “Store” to go back to the main
SETUP screen storing the settings. To
go back to the main SETUP screen
without storing the new settings press
“Cancel”.
“Heater”
To set the heater level select and
confirm “Heater level”, thus display-
ing a new screen (
fig. 104
) for setting
the required level turning the right
knob. The available heating levels are
“1”, “2” and “3” (max). After setting
the required level to return the main
seat settings page and store the set-
ting, press the right knob; otherwise
press “Cancel”.
To turn the seat heating on/off with
the level set and displayed, select and
confirm “Heater”.
“Ventilator”
The “Ventilator” option makes air
come out of the seat holes in order to
facilitate sweat evaporation during
long trips, specially in summer.
To turn this function on/off, select
and confirm “Ventilator” with the
right knob.
fig. 104
L0A5158g
132-151 connect thesis GB 22-10-2007 10:45 Pagina 149