Lancia THESIS CONNECT Owner's Manual - page 48

47

“REPEAT TRACK” FUNCTION

With this function it is possible to

turn on/off the continuous repetition

of the current track.

To turn this function on/off, select

and confirm it with the right knob 

21

(

fig. 1

). When the function is on,

symbol “

3

” appears in the small

square near the wording.

“SETTINGS” FUNCTION 

(audio parameters setting) 

(fig. 27)

To set audio parameters, select and

confirm the “Settings” function with

the right knob 

21

(

fig. 1

) to display

the relevant menu, then follow the in-

structions given in paragraph “Audio

settings”.

“BREAK FOR TA” FUNCTION 

(to receive traffic information)

If you wish to receive traffic infor-

mation while listening to a CD, before

inserting the CD, tune to a station en-

abled to broadcast traffic information

(TP) and turn the “TP” function on.

If while playing the CD, this station

broadcasts traffic information, CD

playing will be temporarily stopped

and resumed automatically at the end

of the message.

To turn this function on/off, select

the “Break for TA” function with the

right knob 

21

(

fig. 1

), then press the

knob to confirm. When the function

is on, symbol “

3

” appears in the small

square near the wording. 

fig. 27

L0A5097g

028-061 connect thesis GB  22-10-2007  10:41  Pagina 47