Lantronix EPS2-100 Installation Manual - M.2 Port Commands

Frequently-used Commands

M - 9

M.2 Port Commands

In the following commands, nn can be a single port number, a list of port numbers separated by 

commas, a range of port numbers separated by dashes, or the word all.

Table M-2:  Port Commands

Command

Option(s)

Description

DEFINE PORT nn 

ACCESS option

DYNAMIC

The port can initiate and receive connection requests.

LOCAL

The port can initiate connection requests, and local logins 

are permitted.

NONE

The port is unusable.

REMOTE

The port can receive host-initiated connection requests.

DEFINE PORT nn BITRONICS 

{EN|DIS}

When Enabled, ensures bidirectional functioning of the 

parallel port. The attached printer must also support 

Bitronics mode.

DEFINE PORT nn CHARACTER size

Toggles the port between 7-bit and 8-bit characters (the 

default). Enter either 7 or 8.

DEFINE PORT nn DSRLOGOUT 

{EN|DIS}

When Enabled, the port will be logged out automatically 

whenever DSR is deasserted.