Lantronix EPS2-100 Installation Manual - 8.1 Dlc Configuration

LAN Manager/DLC Configuration

8 - 1

8 - LAN Manager/DLC Configuration

The EZWebCon configuration software is the easiest way to configure the EPS. This chapter 

explains DLCconfiguration for Windows NT 4.x hosts. Windows 95 does not support DLC 

printing (see Chapter 4, TCP/IP Configuration, for more information).

NOTE: The Server needs an IP address before you can use EZWebCon. See 

the Setting the IP Address section on page 4-2 for instructions.

NOTE: Printing using an LPD client is the preferred method for sending print 

jobs to the EPS. To print using the TCP/IP protocol see the Using the 

Command Line Interface section on page 4-8.

8.1 DLC Configuration

8.1.1 Server Configuration

To use the DLC protocol, you must have one service with the DLC characteristic enabled.

Use the 

Define Service servicename DLC Enabled command. The DLC characteristic may be associated 

with only one service on a given EPS. 

8.1.2 Host Configuration

To send print jobs from a Windows NT host to the EPS, add the EPS as a Windows NT printer.