Lantronix EPS2-100 Installation Manual - J - Pinouts

Pinouts

J - 1

J - Pinouts

J.1 Parallel Information

Lantronix uses standard Centronics parallel connectors.

For optimum performance of your Server, Lantronix recommends the use of high quality parallel 

cables. Choose one of the following:

A Lantronix parallel port cable, part number #500-011 (6 feet). 

Any other brand of IEEE Std 1284-1994 compliant cable. Compliant 

cables can easily be identified by the permanent label IEEE Std 1284-1994 

compliant on the cable itself. 

NOTE: Non-compliant cables have the same type of connectors but different 

electrical characteristics. 

J.2 Serial Information

Lantronix servers are RS-423 compliant, and are thus limited by the equipment at the remote end 

of the serial line. If the Server is connected to an RS-232 device, it is subject to RS-232 limits: 

15m (50 ft.) in length at 9600 baud, and to 2m (6 ft.) at 115.2K baud, although they will generally 

work at longer lengths.