Lantronix EPS2-100 Installation Manual - M.1 Server Commands

Frequently-used Commands

M - 2

M.1 Server Commands

Table M-1:  Frequently-used Server Commands

Command

Option(s)

Description

DEFINE SERVER BOOTP {EN|DIS}

Enables or disables querying for a BOOTP host at 

system boot time.

DEFINE SERVER DHCP {EN|DIS}

Enables or disables querying for a DHCP host at sys-

tem boot time.

DEFINE SERVER GATEWAY ipaddress

Specifies the host to be used as a TCP/IP gateway to 

forward packets between networks. Enter an IP 

address.

DEFINE SERVER 

INCOMING option

BOTH

Enables incoming LAT and Telnet connections.

LAT

Enables only incoming LAT connections.

NONE

Disables incoming connections.

TELNET

Enables only incoming Telnet connections.

PASSWORD

Causes the server to prompt for a password for all 

incoming connections.

NOPASSWORD

Allows connections to be established without prompt-

ing for a password.