Lantronix EPS2-100 Installation Manual - 4 - Tcp/ip Configuration
of
114
TCP/IP Configuration
4 - 1
4 - TCP/IP Configuration
The EZWebCon configuration software is the easiest way to configure the EPS. The following
sections cover IP address configuration and print configuration methods for TCP/IP hosts.
NOTE: The Server needs an IP address before you can use EZWebCon. See
page 4-2 for instructions.
The EPS provides two major methods of printing via TCP/IP: Berkeley remote LPR and RTEL
host software.
Neither Windows for Workgroups nor Windows 95 support LPR directly; however, there are third
party solutions available. For more information about recommended peer-to-peer printing
solutions, see the Lantronix Windows 95 FAQ on the CD-ROM or the Lantronix web site.