Lantronix EPS2-100 Installation Manual - page 99
Frequently-used Commands
M - 7
DEFINE SERVICE
"name" option
TCPPORT string
Specifies a raw TCP listener socket for the service.
Enter a socket number (4000 to 4999) or the word
none.
TELNETPORT
string
Specifies a TCP listener socket for the service. Unlike
TCPport, this option performs Telnet IAC interpreta-
tion on the data stream. Enter a socket number (4000
to 4999) or the word none.
INITIALIZE
option
DELAY num
Schedules a reboot after
num
minutes. Enter a value
from 0 to 120.
CANCEL
Cancels an impending initialization.
FACTORY
Reboots the server to its factory default settings.
NOBOOT
Forces the Server to stop in Boot Configuration Mode
rather than fully rebooting.
RELOAD
Forces the Server to download new operational code
and reprogram its flash-ROM.
LOGOUT option
Logs out the current port (the port that issued the com-
mand).
PORT num
Logs out the specified port.
Table M-1: Frequently-used Server Commands, cont.
Command
Option(s)
Description