Lantronix EPS2-100 Installation Manual - 5 - Netware Configuration

NetWare Configuration

5 - 1

5 - NetWare Configuration

The EZWebCon configuration software is the easiest way to configure the EPS. The following 

sections cover print configuration methods for NetWare hosts.

NOTE: The Server needs an IP address before you can use EZWebCon. See 

the Setting the IP Address section on page 4-2 for instructions.

This chapter explains creating NDS print queues with NetWare Administrator and with the 

PCONSOLE Quick Setup option. To create NDS print queues, you must be running NetWare 

version 4.x with NDS capabilities. 

If you are running NetWare versions 2.x, 3.x, or version 4.x with bindery emulation, you may 

configure bindery print queues using QINST (bindery only) or PCONSOLE. For more 

information, see the NetWare chapter of the Print Server Reference Manual, located on CD-ROM.