Lantronix EPS2-100 Installation Manual - M.3 Protocol Commands

Frequently-used Commands

M - 12

M.3 Protocol Commands

In the following table, PROTO is an abbreviation for the optional keyword PROTOCOL.

Table M-3:  Protocol Commands

Command

Option(s)

Description

DEFINE 

IPSECURITY 

ipaddress option

Note: An 

ipaddress

with a 0 in any segment 

implies Incoming and Out-

going Disabled. An 

ipaddress

 with a 255 

in any segment applies to 

all addresses in that range.

Note: Rules are applied in 

the order in which they are 

entered.

PORTS nn

Restricts connections to the specified IP address from 

the specified ports, and connections from the IP address 

to the specified ports. If no port (

nn

) is specified, the 

command applies to all physical and virtual ports. See 

the Port Commands section for information about port 

lists.

INCOMING 

{EN|DIS}

Allows or restricts connections and serial port logins 

from the specified address (on the network) into the 

Server.

OUTGOING 

{EN|DIS}

Allows or restricts Telnet sessions to the specified 

address (on the network) from the Server.

BOTH {EN|DIS}

Allows or restricts connections to and from the speci-

fied address.

PRINTING 

{EN|DIS}

Allows or restricts TCP/IP-based printing for the speci-

fied address.