Lantronix EPS2-100 Installation Manual - M - Frequently-Used Commands

Frequently-used Commands

M - 1

M - Frequently-used Commands

This appendix lists some of the most frequently-used commands of the Print Server command set. 

More information about the command set, including additional options, can be found in the Print 

Server Reference Manual on the CD-ROM. 

Please note the following before continuing:

Commands are divided into Server (general), Port, and Protocol sections. 

Within each section, commands are listed alphabetically.

Commands may require privileged user status. Enter Set Privileged, 

then enter the privileged password when prompted. 

When you enter a Define or Purge command, you must reboot the Server 

for the command to take effect.

When the abbreviated syntax "{EN|DIS}" is shown, you must choose 

either Enabled or Disabled to complete the command. 

When nn is shown, enter a single port number, a list of port numbers sepa-

rated by commas, a range of port numbers separated by dashes, or the word 

all.