Summary of C9600hdn

  • Page 1

    Memory dimm installation instructions dimm part number 128mb: 70050201 256 mb: 70050301 512 mb: 70050401 58365101.Fm page 0 friday, june 10, 2005 10:59 am.

  • Page 2

    1 c9600/9800 memory dimm installation instructions 59375001 june 2005 every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki data assumes no responsibility for the results of errors beyond its control. Oki data also cannot guarantee that...

  • Page 3: Getting Started

    2 getting started the printers have two sockets for memory dimm boards. You can expand the printer's memory up to 1 gb. To achieve the 1 gb memory in most models, you will need to replace the dimm(s) provided with 512 mb dimms. The printer will not acknowledge more than 1 gb of memory. Caution! Circ...

  • Page 4: Prepare The Printer

    3 prepare the printer 1. Turn off the printer and unplug the power cord. 2. Detach the interface cable from the printer. 3. Remove and save the thumbscrew at the top and bottom which hold the control board in place. 58365101.Fm page 3 friday, june 10, 2005 10:59 am.

  • Page 5

    4 4. Open the control board cover by pulling out and toward the left. 58365101.Fm page 4 friday, june 10, 2005 10:59 am.

  • Page 6: Install The Dimm(S)

    5 install the dimm(s) 1. Locate the dimm sockets on the control board. 2. Push out the white lock tabs at either end of the dimm socket. Caution! Circuit boards can be damaged by static electricity and rough handling. To avoid damage, ground yourself (touch metal) before handling dimms. 58365101.Fm ...

  • Page 7

    6 3. Remove the dimm from its shipping package. 4. Align the dimm with the narrow strip ( 1 ) on its metallic contact edge toward the front of the control board, then carefully insert the dimm in the socket. Press down firmly, until you feel the board engage the connector, then raise the white tabs ...

  • Page 8: Complete The Installation

    Complete the installation 1. Close the control board cover. 2. Reinstall the thumbscrews at the top and bottom of the board. 3. Reattach the computer interface cable. 4. Plug the power cord into the power outlet and turn on the printer. ©oki data americas, inc. 59375001 58365101.Fm page 7 friday, ju...