1. DL manuals
  2. Oki
  3. Printer Accessories
  4. C9600hdn
  5. Installation Manual

Oki C9600hdn Installation Manual

Manual is about: Guide: Network User's, OkiLAN 8200e

Summary of C9600hdn

  • Page 1

    Finisher unit installation guide components 1. Finisher unit 2. Finisher stand 3. Inverter unit 4. Stacking tray 5. Rear cover 6. Clear band 7. Band stopper (2) prepare the printer 1. Turn the printer off and disconnect the power cord and interface cable. 2. Using a screwdriver, remove the breakout ...

  • Page 2

    2 5. Close the stacker. 6. Install the metal brackets as shown. Assemble the finisher 1. Attach the guide rail of the inverter to the printer with 2 screws. 2. Hook the finisher stand to the inverter. 3. Attach the finisher stand to the inverter with 2 screws. 4. Slip one end of the clear band over ...

  • Page 3

    3 5. Slip the other end of the band through the retainer on the finisher, then secure it with the smaller stopper. 6. Turn the cover so it faces the finisher. 7. Place the larger stopper over the tab and turn to lock it in position 8. Attach the rear cover to the finisher and close it. 9. Loosen the...

  • Page 4

    © 2005 oki data americas, inc. 58372801 12.Position the stacker on the back of the finisher with the hooks engaged. 13.Make sure the lever on the finisher is positioned above the stacker. 14.Attach the stacker with four screws. Complete the assembly 1. Push the finisher against the printer until the...