Vent-Axia Sentinel Kinetic B Left Installation & Commissioning Manual - page 25
Commissioning
Sentinel Kinetic MVHR Installation & Commissioning
25
Start-up Screens
(Refer to Control Mode 01 unless otherwise indicated)
Sentinel Kinetic Version Screen
The Sentinel Kinetic Version screen displays the
firmware version number for 3 seconds.
No adjustments are possible on this screen.
V--
Language Screen
The Language screen displays the language used for
the screens. It is typically displayed for 5 seconds, or
longer if changing the setting.
(To re select a new language disconnect and then
reconnect to the mains supply).
Control Mode Screen
Language
English
Selects between Control Mode 01 operation described
herein and the alternative Control Mode 02 described
in Appendix One.
Control Mode
01
Airflow Units Screen
The Airflow Units is a percentage of the unit’s
maximum flow.
Airflow Units
%
Wireless Control Screen
The Wireless Control screen automatically displays
whether the wireless boost control switch is fitted. It is
typically displayed for 3 seconds.
Wireless Control
Not Fitted
Humidity Sensor Screen
The Humidity Sensor screen displays whether the
humidity sensor is fitted. It is typically displayed for
3 seconds.
Humidity Sensor
Not Fitted
Low Airflow / Normal Airflow / Boost Airflow Screen
When the start-up screens are finished, the low or normal screen is
displayed showing operating status (Low Airflow X % or Normal Airflow
X % or Boost Airflow X %).
The Normal screen displays the rate of normal airflow (supply air)
through the unit.
If the installation has proportional sensors or an internal humidity
sensor fitted, and any of these are boosting the airflow, an
α
symbol
will be displayed.
Normal Airflow
30 %