Xerox 7142 Service Manual - page 32
2 Product Overview
RJ-901C/RJ-900C Maintenance Manual
2-8
(2) LCD Monitor and Status Lamps
7
[Forward feed] key
Feeds the media in the forward
direction.
-
[Setting/value -] key
-
- Changes the setting value in the
reverse direction.
- Decreases the value when inputting
values.
8
[Power] key
Turns the plotter on and off.
Turns the plotter on and off.
No.
Name
Color
Status
Function
9
Power lamp
Green On
The plotter is switched on.
Blinking
An error has occurred. The contents will be displayed on the
LCD monitor.
Off
The plotter is switched off.
10
Data lamp
Red
On
- The plotter is analyzing received data.
- The plotter is printing data.
Blinking
The plotter is receiving data.
Off
The plotter is not receiving, analyzing or printing data.
11
Roll lamp
Green On
The media loaded in the plotter is set to roll media.
Off
The media loaded in the plotter is set to cut media.
12
Sheet lamp
Green On
The media loaded in the plotter is set to cut sheet.
Off
The media loaded in the plotter is set to roll sheet.
13
Color lamp
Red
On
The plot mode is set to color.
Off
The plot mode is set to monochrome.
14
Black & white
lamp
Red
On
The plot mode is set to monochrome.
Off
The plot mode is set to color.
15
High speed lamp
Green On
- The plot mode is set to High speed.
- When the Normal lamp is also on, the print mode is set to
High quality.
Off
The plot mode is set to Normal.
16
Normal lamp
Green On
- The plot mode is set to Normal.
- When the Normal lamp is also on, the print mode is set to
High quality.
Off
The plot mode is set to High speed.
17
LCD monitor
-
-
This monitor displays the operation status and error
messages of the plotter.
No.
Name
Normal
Setup menu display