Xerox 7142 Service Manual - page 86

4 Parts Replacement

RJ-901C/RJ-900C 　 Maintenance Manual

4-40

NOTE

When removing the damper assembly, note the following.

• To easily remove the damper assembly, insert a flat-head driver between the carriage and the 

damper assembly left protruding part, then pry out the damper assembly.

• To avoid residual ink leakage, place the removed damper on a rag.

11. Remove the damper locating material-retaining screw (pan-head screw with spring washer and flat 

washer M3 

×

 6 W sems: 2pce).

12. Remove the damper locating material.

No.

Part name

1

Flat-head driver insertion point

2

Damper assembly

No.

Part name

1

Damper locating material

2

Damper locating material screw

1

2

1

2