Xerox 7142 Service Manual - page 74
Manual is about: Wide Format Printer
of
341
4 Parts Replacement
RJ-901C/RJ-900C Maintenance Manual
4-28
3. Remove the PF_ENC assembly-retaining screw (tapping screw M2
×
5: 2pcs).
4. Replace the PF_ENC assembly.
5. To reassemble the unit, reverse the removal procedure.
6. Perform adjustments by following the instructions in
"7.2 Adjustment Item" p.7-3
.
4.4.3
Replacing PF_ENC Scale
NOTE
Before replacing parts in the PF_ENC scale assembly, remove the following parts.
• L side cover:
"4.2.3 Removing L Side Cover" p.4-9
1. Remove the ENC holder-retaining screw (tapping screw M3
×
6, P tight cup).
2. Replace the PF scale.
3. To reassemble the unit, reverse the removal procedure.
No.
Part name
1
Clamp
2
PF_ENC assembly screw
3
PF_ENC assembly
No.
Part name
1
ENC holder screw
2
PF_ENC scale
3
ENC holder
1
2
3
2
3
1
1