Xerox DocuPrint 4635 User Interface Reference - page 107
JOB CONTROL WINDOWS
Parameters
On - Selecting this button turns the Bar Code Reader on. This
command is accessible in Log level 2 and above.
Off - Selecting this button turns the Bar Code Reader off. This
command is accessible in Log level 5 only.
Pages Left Off: - Entering a number (n) between 1 and 65534
tells the system for how long the Bar Code Reader will be turned
off. It will remain in the off mode for n pages or until Output
encounters the end of report (whichever occurs first).
Alignment - Selecting this button alters the bar code reader to
the Bar code reader alignment mode. From this, mode alignment
can be made before the job is run. This command is accessible in
Log level 2 and above.
Refer to the Xerox 4635 LPS Operator Guide and the Xerox 4635
LPS PDL/DJDE Reference for more information on the Bar Code
Reader setup.
Sample Fonts/Forms/Logos
Figure 7-10.
Job Control>Sample Fonts/Forms/Logos window
Description
Use the Sample Fonts/Forms/Logos window to print samples of
fonts, forms, logos, or graphics from the system disk.
Parameters
Font/Form/Logo File ID: To sample a font, form, or logo, either
enter a specific file name in this field, or select a file type from
the auxiliary menu. The auxiliary menu options are as follows:
*.FNT prints samples of all fonts at 300 spots per inch (spi).
*.FRM prints samples of all forms at 300 spi.
*.LGO prints samples of all logos at 300 spi.
Copies: 1. Enter the number of copies you want. The default is
1 copy; the maximum number of copies is 32,767.
Format: Simplex, Duplex. Select either simplex (one-sided) or
duplex (two-sided) printing.
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE
7-9