Xerox DocuPrint 4635 User Interface Reference - page 98
UTILITIES WINDOWS
Exit to DOS
Figure 5-17.
Utilities>Exit to DOS window
Description
Use the Exit to DOS window to put the PC in the DOS mode of
operation to run DOS applications or to safely power off the PC
UI. This utility puts the UI in a safe state to prevent any loss of
records from the Console Log. If a record is being written to the
console log, the PC UI completes writing that record to the log
and stops all activities, including communication with the ESS,
before exiting to DOS.
When the PC UI is in DOS mode, you can turn the PC UI power
off. To logon, turn the power switch off and on, press the
boot/reset button on the PC, or press .
Header buttons
Yes: Selecting this option exits you from object mode (windows)
to DOS mode.
No: Selecting this option returns you to object mode (windows).
Notes
DOS applications cannot be run while the PC UI is in object
mode or TEM. You must exit to DOS to run DOS applications.
To return to object mode windows from DOS mode, enter
manui at the DOS prompt.
Exit to DOS is unavailable when the system is performing critical
functions like file transfers and Audit logging.
5-22
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE