Xerox DocuPrint 4635 User Interface Reference - page 120
SYSTEM CONTROL WINDOWS
Both the Attention light and the audible alarm are not operational
when the printer is in Energy Saver mode.
Set Date/Time
Figure 8-9.
System Control>Set Date/Time window
Description
Select the Set Date/Time option from the System Control menu
to set the system date and time.
Parameters
Date: Enter Month/Day/Year.
Time: Enter Hours:Minutes:Seconds.
Notes
The system must be idle when you perform this task (not
printing, offline, and not performing any non-print tasks).
You must be at logon level 2 to use this task.
It should not be necessary to set the Date/Time after a power
failure or power-off (the system clock is battery run); however,
you might want to change the Time after Daylight Savings and
Standard Time changes.
8-8
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE