Xerox DocuPrint 4635 User Interface Reference - page 70
DISK WINDOWS
Backup
Figure 4-2.
Disks>Backup window
Description
Use this window as a rapid disk save to tape capability.
The tape must be mounted and online when the task is invoked.
If the entire contents of a disk drive cannot fit on a single tape,
you will be prompted to load another tape. The system writes a
tape number at the beginning of the tape and maintains the
sequence until the entire disk is backed up.
Header buttons
Apply/List: Selecting this header button starts the disk backup
process and lists file information on the display as the system
files are copied to tape. When several disks are backed up, this
list can be extensive.
Abort: Selecting this header button starts abort and exit the
backup process. No files are lost by aborting an in-process
backup to tape.
Parameters
Disk ID: DP0, DP1, DP2, DP3. Select/Deselect the Disk ID(s)
that are to be backed up. The DP0 check box is always shown.
Others are shown only if the controller is configured with them.
Tape Device: TD0, TD1, TD2. Select/enter the tape device that
the disk will be saved to.
Density: 6250, 1600. Select the tape density. Available for reel-
to-reel tape only.
4-2
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE