Yamaha YZF-R1S Service Manual - Chk
Other manuals for YZF-R1S:
Owner's Manual, Owner's Manual
Manual is about: YZF-R1S; YZF-R1SC Motorcycle
of
457
3-36
ADJUSTING THE EXUP CABLES
CHK
ADJ
EAS00101
ADJUSTING THE EXUP CABLES
1. Remove:
Sbottom cowlings
Refer to “COWLINGS”.
2. Remove:
SEXUP valve pulley cover
1
3. Check:
SEXUP system operation
a. Turn the main switch ON.
b. Check that the EXUP valve operates properly.
4. Check:
SEXUP cable free play (at the EXUP valve
pulley)
a
+
b
Maximum EXUP cable free play
(at the EXUP valve pulley)
Less than 4 mm (0.16 in)
5. Adjust:
SEXUP cable free play
a. Turn the main switch to “ON”.
b. Check the EXUP pulley position.
c. Projection of the EXUP pulley position is be-
tween
1
and
2
.
d. Loosen the both locknuts
3
.
e. Turn the both adjusting nuts
4
in or out.
f. Tighten the both locknuts.
6. Install:
SEXUP valve pulley cover
EXUP valve pulley cover bolt
10 Nm (1.0 m
Skg, 7.2 ftSlb)