Yamaha YZF-R1S Service Manual - Chas
4-7
FRONT WHEEL AND BRAKE DISCS
CHAS
35 Nm (3.5 m
Skg, 25 ftSlb)
NOTE:
WARNING
NOTE:
NOTE:
6. Install:
Sbrake caliper (left and right)
Make sure that there is enough space between
the brake pads before installing the brake cali-
pers onto the brake discs.
Make sure the brake hose is routed properly.
EAS00549
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
SAfter replacing the tire, wheel or both, the front
wheel static balance should be adjusted.
SAdjust the front wheel static balance with the
brake discs installed.
1. Remove:
Sbalancing weight(s)
2. Find:
Sfront wheel’s heavy spot
Place the front wheel on a suitable balancing
stand.
a. Spin the front wheel.
b. When the front wheel stops, put an “X
1
” mark
at the bottom of the wheel.
c. Turn the front wheel 90
_ so that the “X
1
” mark
is positioned as shown.
d. Release the front wheel.
e. When the wheel stops, put an “X
2
” mark at
the bottom of the wheel.
f. Repeat steps (d) through (f) several times
until all the marks come to rest at the same
spot.
g. The spot where all the marks come to rest is
the front wheel’s heavy spot “X”.