Yamaha YZF-R1S Service Manual - Chk
3-70
REPLACING THE HEADLIGHT BULBS/
ADJUSTING THE HEADLIGHT BEAMS
CHK
ADJ
CAUTION:
a
b
a
b
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
5. Install:
Sheadlight bulb holder
6. Install:
Sheadlight bulb cover (high beam)
Sheadlight bulb coupler (low beam)
7. Connect:
Sheadlight coupler (high beam)
Sheadlight cover (low beam)
EAS00185
ADJUSTING THE HEADLIGHT BEAMS
The following procedure applies to both of the
headlights.
1. Remove:
Sfront cowling inner panels
Refer to “COWLINGS”.
2. Adjust:
Sheadlight beam (vertically)
a. Turn the adjusting screw
1
in direction
a
or
b
.
Direction
Headlight beam is raised.
Direction
Headlight beam is
lowered.
3. Adjust:
Sheadlight beam (horizontally)
a. Turn the adjusting screw
2
in direction
a
or
b
.
Direction
Headlight beam moves to
the left.
Direction
Headlight beam moves to
the right.
4. Install:
Sfront cowling inner panels
Refer to “COWLINGS”.