Yamaha YZF-R1S Service Manual - Gen
1-2
1
1 Clock
2 Speedometer
3 “SELECT” button
4 “RESET” button
5 Tachometer
6 Coolant temperature display / air intake
temperature display
7 Odometer / tripmeters / fuel reserve tripme-
ter / stopwatch
8 Shift timing indicator light
1 Clock
2 Speedometer
FEATURES
GEN
INFO
NOTE:
EAS00019
FEATURES
INSTRUMENT FUNCTIONS
Multi-function display
The multi-function meter unit is equipped with
the following:
Sa speedometer (which shows the riding
speed)
Sa tachometer (witch shows engine speed)
San odometer (which shows the total distance
traveled)
Stwo tripmeters (which show the distance
traveled since they were last set to zero)
Sa fuel reserve tripmeter (which shows the
distance traveled since the fuel level warning
light came on)
Sa stopwatch
Sa clock
Sa coolant temperature display
San air intake temperature display
Sa self-diagnosis device
Sa display brightness and shift timing indicator
light control mode
SBe sure to turn the key to “ON” before using the “SELECT” and “RESET” buttons.
Clock mode
Turn the key to “ON”.
To set the clock
1. Push the “SELECT” button and “RESET”
button together for at least two seconds.
2. When the hour digits start flashing, push the
“RESET” button to set the hours.
3. Push the “SELECT” button, and the minute
digits will start flashing.
4. Push the “RESET” button to set the minutes.
5. Push the “SELECT” button and then release
it to start the clock.