Yamaha YZF-R1S Service Manual - Eng
5-18
CAMSHAFT
ENG
NOTE:
NOTE:
NOTE:
3. Install:
Stiming chain tensioner spring
Stiming chain tension rod
1
Prior to installing the timing chain tensioner rod,
drain the engine oil from the timing chain ten-
sioner housing.
a. Install the timing chain tensioner spring and
timing chain tensioner rod
1
.
b. Squeeze the timing chain tensioner clip
2
and push the timing chain tensioner rod
3
.
When the timing chain tensioner rod
3
is
pushed while holding the grip of the timing chain
tensioner clip
2
, make sure not to release the
timing chain tensioner rod
3
before releasing
the timing chain tensioner clip
2
. (Otherwise,
the timing chain tensioner rod
3
may run off.)
c. Hook the clip
4
to the timing chain tensioner
rod
3
.
Hook the timing chain tensioner rod pin
5
to the
center of the clip
4
. After the installation, check
that the clip
4
can come off by its own weight by
pushing the timing chain tensioner rod
3
at the
position of installation.