Yamaha YZF-R1S Service Manual - Spec
2-48
a Fuel piping connector attach-
ment directions. (fuel pump side)
1. Insert the connector until the
click sound is heard and check
that the connector does not
come off. Make sure that no for-
eign matter is caught in the seal-
ing section. (It is prohibited to
wear the cotton work gloves or
equivalent coverings.)
G This part works as a dropout
stopper.
2. After Item 1 mentioned above is
finished, check that the clamp is
inserted from the down side, and
,
and
-sections are per-
fectly equipped.
A
B
C
A Install the lip of O-ring facing up-
ward.
B Install the part pointing the white
paint part of the hose to the left
side of the vehicle.
C Any direction of the clip grip can
be accepted.
D Install the clip grip as specified in
the drawing.
E Install the part pointing the white
paint part of the hose to the left
side of the vehicle.
F Point the clip grip to the left side
of the vehicle.
CABLE ROUTING
SPEC
1
Fuel tank
2
O-ring
3
Fuel tank drain hose
4
Fuel tank breather hose
5
Clip
6
Air filter stay
7
Fuel hose 2
8
3 way connector
9
Pipe
10
Fuel tank bracket
11
Fuel hose clamp
12
Fuel hose 1
13
Fuel pump assembly